NODE DETAILS
Processor: AMD Phenom II X6 (6 Cores)
RAM: 16 GB DDR3
Hard Drives: 4 x 1TB Seagate Barracuda
Operating System: CentOS 6.5 Minimal
DISK DETAILS
/dev/sda - root
/dev/sdb - swift
/dev/sdc - cinder
/dev/sdd - cinder
PREPARE DISK FOR SWIFT
Create /dev/sdb1 partition for the disk marked for Swift
# fdisk /dev/sdb
Format the partition as ext4
# mkfs.ext4 /dev/sdb1
NETWORK CONFIGURATION
# vi /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0
TYPE=Ethernet
ONBOOT=yes
NM_CONTROLLED=no
BOOTPROTO=none
HWADDR=<MAC-address>
IPADDR=<IP-address>
NETMASK=<netmask>
GATEWAY=<gateway-IP-address>
IPV6INIT=no
SET TIMEZONE AND SYNCHRONIZE TIME
# mv /etc/localtime /etc/localtime.bak
# cp /usr/share/zoneinfo/Asia/Kolkata /etc/localtime
# yum install ntp
# chkconfig ntpd on
# service ntpd start
UPDATE CENTOS
yum -y update
DISABLE SELINUX
# vi /etc/selinux/config
SELINUX=disabled
# reboot
CREATE LOGICAL VOLUME GROUP FOR CINDER
Create partitions /dev/sdc1 and /dev/sdd1 on /dev/sdc and /dev/sdd using fdisk
# fdisk /dev/sdc
# fdisk /dev/sdd
Create logical volume group using the created partitions
# yum install lvm2
# pvcreate /dev/sdc1 /dev/sdd1
# vgcreate cinder-volumes /dev/sdc1 /dev/sdd1
RUN RDO PACKSTACK
# yum install -y http://rdo.fedorapeople.org/rdo-release.rpm
# yum install -y openstack-packstack
# packstack --gen-answer-file my_answers.txt
# vi my_answers.txt
Refer to the attached file for details about the answer file configurations.
# packstack --answer-file=my_answers.txt
UPDATE NETWORK CONFIGURATION
# vi /etc/sysconfig/network-scripts/ifcfg-br-ex
DEVICE=br-ex
IPADDR=<IP-address>
NETMASK=<netmask>
GATEWAY=<gateway-IP-address>
ONBOOT=yes
STP=off
HOTPLUG=no
NM_CONTROLLED=no
# vi /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0
ONBOOT=yes
HWADDR=<MAC-address>
# ovs-vsctl add-br br-ex
# ovs-vsctl add-port br-ex eth0
REBOOT MACHINE TO ENABLE ALL CHANGES
# reboot
ACCESS HORIZON DASHBOARD AT http://<IP-address>
Login details can be found at /root/keystonerc_admin.
Thanks for sharing,
ReplyDeletei tried the 'UPDATE NETWORK CONFIGURATION' section and after reboot i was not able to access the host ip address horizon dashboard or even ssh into it. i noticed i could not ping out of the host as well.
any tips to resolve?
I found it interesting that you are using cells to distinguish between unique hardware configurations. That seems like a heavyweight solution but perhaps it is also historical.
ReplyDeleteOpenstack hypervisor support
Nice info regarding Steps to install OpenStack Icehouse using RDO Packstack on a single node My sincere thanks for sharing this post Please Continue to share this post
ReplyDeleteCloud Computing Training in Chennai
hat is very interesting; you are a very skilled blogger. I have shared your website in my social networks! A very nice guide.. Keep blogging.. Thank you...
ReplyDeleteCloud Computing Training in Chennai | Salesforce Training in Chennai
Thanks For Sharing the Articles,just Thanks Is not enough for all Keep Updating The Articles looking towards more
ReplyDeleteTo Learn Python and get a Consequence with Happy Then visit same
python training in chennai | python training in annanagar | python training in omr | python training in porur | python training in tambaram | python training in velachery
this article is very informative post. you are a very skilled blogger.Nice info regarding Steps to install OpenStack using RDO Packstack on a single node. Useful information.
ReplyDeletepython training in chennai
python online training in chennai
python training in bangalore
python training in hyderabad
python online training
python flask training
python flask online training
python training in coimbatore
virtual event A venue with the bandwidth, tech support and backup plan that can serve an in-person event may not be extensive enough for a hybrid event. funny birthday messages, get well quotes and happy birthday letters
ReplyDelete